2 Pack Magnetic RV Solar Lights, 100 LED Outdoor Motion Sensor Lights | 3 night modes, 270° lighting and four 40 mm adhesive magnetic pads for RV doors, steps, awnings, sheds and campsites

Camp life tends to get dark when both hands are busy—unlocking the RV, carrying gear, checking the steps, or taking the dog outside. This 2-pack adds removable lighting around RV doors, awnings, trailer entrances, storage bays, shed doors, and campsite paths without running wires. Each RV solar light is a solar-powered sensor light with 100 LEDs arranged across three panels for 270° illumination. Choose motion-only for quick entry lighting, dim plus motion for low background visibility with a brighter response, or constant dim mode for steady nighttime guidance. The 120° PIR sensor has an approximate 3 to 5 m range, which may vary with mounting height, temperature, movement direction, and nearby objects. For magnetic mounting, attach two included 40 mm adhesive magnetic pads to the back of each light, then place the light on a clean, compatible metal surface. These RV solar lights can serve as solar motion sensor lights near parked campers, RV outside lights by entry doors, RV step lights, camper awning lights, outdoor camper lights, solar wall lights on compatible metal surfaces, or a solar light for shed, garage, fence, porch, pathway, and campsite areas. Please do not install indoors. Set the switch to ON and charge in direct sunlight for 6 to 8 hours before first use. The selected mode operates automatically after dark. If the RV light does not turn on, recharge it in sunlight during the day. Keep the solar panel clean and unobstructed, check the magnetic hold before use, and remove the lights before driving. These solar motion lights are for stationary area lighting, not brake, tail, marker, clearance, or towing lights.

• Magnetic Setup, No Toolbox Needed: Attach two included 40 mm adhesive magnetic pads to the back of each light, then place it on a clean, compatible metal surface. No wiring or drilling
• Three Modes for Real RV Nights: Choose motion-only, dim plus motion, or constant dim light for doors, steps, awnings, and late-night campsite checks
• Solar Charging Made Clear: Set the switch to ON and place the panel in direct sunlight for 6 to 8 hours before first use. After dark, the selected mode runs automatically. If the light stays off, the battery may need more sunlight. Keep the panel clean, avoid deep shade, and allow extra charging time after cloudy weather. Please do not install indoors
• Wide Coverage Where You Need It: Each solar-powered sensor light uses 100 LEDs across three panels for 270° illumination around RV doors, trailer steps, awning areas, shed entrances, steel gates, garages, porches, pathways, and parked campsites. The 120° PIR sensor detects movement from about 3 to 5 m, although temperature, mounting height, movement direction, and nearby objects may affect the range
• Compact Lighting for More Than One Stop: At 4.9 x 3.7 x 1.1 inches, these magnetic solar lights for outdoor RV use fit near doors, storage bays, steps, and narrow awning areas without wiring. Use them as RV outside lights, RV step lights, camper awning lights, outdoor camper lights, solar wall lights on compatible metal surfaces, or a solar light for shed entrances. Check the hold before use and remove the lights before driving