RIITOP NVMe to Oculink Adapter (20cm), M.2 NVMe PCIe 4.0 x4 to OCuLink SFF-8611 4i Host Adapter Speed up to 64Gbps for eGPU and SSD

RIITOP M.2 NVMe to Oculink SFF-8611 Extender (20cm)

• [NVMe to OCuLink Adapter] RIITOP OcuLink SFF-8612 to NVMe Extender allows you expand an OCuLink SF-8611 4i Host via M.2 PCIe NVMe SSD Socket on Laptop or MINI PC, to connect OCuLink eGPU or U.2 U.3 SSD. It comes with 20cm/7.87inch FPC Circuit Board
• [Features] 1.RIITOP OCuLink to NVMe Extension Adapter supports PCIe 4.0/3.0 x4, Data transfer rate up to 64Gbps, there is no speed limited. 2. The NVMe Board's full length is 22x80mm, but it can be cut to short size 22x30mm, 22x42mm, 22x60mm to fit different size of SSD Socket 3. 15cm FPC Circuit Board will help you Connect OCuLink Cable easily
• [Hardware Requirement] 1x Available M.2 NVMe PCIe 4.0 x4 Socket, Please note: PCIe x2 or any SATA-Based M.2 Socket can not be Compatible 2. The Speed will be slower if NVMe Socket is PCIe 3.0 or 2.0, 3. There is no OCuLink Cable in package, please prepare the right Cable to connect the device you want to use, one side of the cable should be SFF-8611 4i (SFF-8611 has 2 versions: 4i and 8i)
• [Package Including] 1x RIITOP NVMe to OCuLink SFF-8612 Adapter with 20CM FPC Cable; 1x Scredriver; 1x Fixing Screw
• [Please Note] Some Laptops does not support NVMe Socket to expand to connect eGPU, please check the protocol of NVMe Socket on the user manual from brand website first