TMAXCN Brand Vacuum Glove Box with Purification System TMAX-VGB-6 (TMAX-VGB-6)

Manufacturer: ‎Xiamen Tmax Battery Equipments Limited Model: TMAX-VGB-6 Note: Customized other models or sizes of vacuum glove box，please contact TMAXCN Brand Closed Loop Gas Circulation: Inert gas in a closed loop. The gas is circulated by the blower and purifier, H2O, O2 can be removed continuously Auto Purging: The replacement of the atmosphere inside the glove box can be achieved automatically by the purging valves Automatic Regeneration: H2O and O2 removal material can be regenerated. The regeneration process can be program controlled Automatic Pressure Control: The pressure in the glove box is controlled automatically by the Programmable Logic Controller (PLC). Working pressure can be set between +10mba and -10mba. If the pressure goes over+/- 12mbar, the system will be protected automatically Eco Mode: The vacuum pump will be activated automatically when necessary, and will turn off after a period of idle time. Blower frequency will be switched to 25Hz when moisture and oxygen level reaches to less than 1 ppm Notes： Cabinet water and oxygen content under the standard condition: Water content ≤1ppm, oxygen content≤1 ppm (Note: Standard condition is that an atmospheric pressure, constant temperature of 20 degree) Leakage Rate: ≤0.05Vol%/ h (subject to change value of oxygen content in box) Used Gases a) Working Gas: N2、Ar、He and etc b) Controlling Gas: Compressed air or Inert Gas C) Restoring Gas: Mixed gas of working gas and hydrogen Restoring gas is as same as working gas if there is only water removal system or oxygen removal system Remarks: All Single side boxes of 4 gloves are assembled glove box. Numbers of assembled box can be ordered as per customer’s needs. Quantity of purification columns is also designed to be matched according to customer’s requirements

• Manufacturer: ‎Xiamen Tmax Battery Equipments Limited
• Model: TMAX-VGB-6
• Note: Customized other models or sizes of vacuum glove box，please contact TMAXCN Brand
• Closed Loop Gas Circulation: Inert gas in a closed loop. The gas is circulated by the blower and purifier, H2O, O2 can be removed continuously. Auto Purging: The replacement of the atmosphere inside the glove box can be achieved automatically by the purging valves. Automatic Regeneration: H2O and O2 removal material can be regenerated. The regeneration process can be program controlled.
• Automatic Pressure Control: The pressure in the glove box is controlled automatically by the Programmable Logic Controller (PLC). Working pressure can be set between +10mba and -10mba. If the pressure goes over+/- 12mbar, the system will be protected automatically. Eco Mode: The vacuum pump will be activated automatically when necessary, and will turn off after a period of idle time. Blower frequency will be switched to 25Hz when moisture and oxygen level reaches to less than 1 ppm